Hot selling europe market 6-32A 1P+N CB approval AFDD untis arc fault circuit breaker
- group name
- AFDD
- Min Order
- 1 piece
- model
- AFDD
- Delivery clauses under the trade mode
- FOB, CFR, EXW
- Acceptable payment methods
- T/T, L/C, Credit Card, PayPal, Westem Union, Cash
- update time
- Tue, 15 Oct 2019 12:13:32 GMT
Paramtents
Pole No 1P+N
Rated voltage AC 230
Rated current(A) 6A,10A,16A, 20A,25A & 32A
Tripping curve B,C
Rated frequency 50/60Hz
Energy limiting class 3
Rated impulse withstand voltage 6.2kV
Fastening torque 2 0Nm
High short-circuit breaking capacity (Icn) 6kA
Electro-mechanical endurance 10000
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
Technical Data
|
l PoleNo.: 1P+N |
|
l Rated voltage: AC 230 |
|
l Rated current (A): 6A,10A,16A, 20A,25A & 32A |
|
l Tripping curve: B, C, |
|
l High short-circuit breaking capacity (lcn):6kA |
|
l Rated frequency: 50/60Hz |
|
l Energy limiting class: 3 |
l Rated impulse withstand voltage: 6.2kV |
l Electromechanical endurance: 10000 |
l Contact position indication |
l Fastening torque: 2.0Nm |
|
l Connection terminal:Screw terminal Pillar terminal with clamp |
|
l Connection capacity: Rigid conductor up to 25mm2 |
|
l Fastening torque: 2.0Nm |
|
l Installation:On symmetrical DIN rail 35.5 mm Panel mounting |
|
l Terminal Connection Height: 21mm |
The Arc detection unit will recognise serial, parallel and ground arc faults in both radial and ring circuits. (Note serial faults in a ring circuit does not always lead to an arc fault due to power flowing to either side of the fault at the same potential voltage.
These units must be switched off when conducting insulation testing to avoid damage to the AFDD
The AFDD should be tested every month by pushing the Test button.
Recommended terminal screw torque 2Nm
